Zhuang Liu

Novel poly( N ‐isopropylacrylamide)‐clay (PNIPAM‐clay) nanocomposite (NC) hydrogels with both excellent responsive bending and elastic properties are developed as temperature‐controlled manipulators. The PNIPAM‐clay NC structure provides the hydrogel with excellent mechanical property, and the thermoresponsive bending property of the PNIPAM‐clay NC hydrogel is achieved by designing an asymmetrical distribution of nanoclays across the hydrogel thickness. The hydrogel is simply fabricated by a two‐step photo polymerization. The thermoresponsive bending property of the PNIPAM‐clay NC hydrogel is resulted from the unequal forces generated by the thermoinduced asynchronous shrinkage of hydrogel layers with different clay contents. The thermoresponsive bending direction and degree of the PNIPAM‐clay NC hydrogel can be adjusted by controlling the thickness ratio of the hydrogel layers with different clay contents. The prepared PNIPAM‐clay NC hydrogels exhibit rapid, reversible, and repeatable thermoresponsive bending/unbending characteristics upon heating and cooling. The proposed PNIPAM‐clay NC hydrogels with excellent responsive bending property are demonstrated as temperature‐controlled manipulators for various applications including encapsulation, capture, and transportation of targeted objects. They are highly attractive material candidates for stimuli‐responsive “smart” soft robots in myriad fields such as manipulators, grippers, and cantilever sensors.

Novel near-infrared (NIR) light-responsive poly(N-isopropylacrylamide)/graphene oxide (PNIPAM-GO) nanocomposite hydrogels with ultrahigh tensibility are prepared by incorporating sparse chemical cross-linking of small molecules with physical cross-linking of graphene oxide (GO) nanosheets. Combination of the GO nanosheets and thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) polymeric networks provides the hydrogels with an excellent NIR light-responsive property. The ultrahigh tensibility of PNIPAM-GO nanocomposite hydrogels is achieved by simply using a very low concentration of N,N'-methylenebis(acrylamide) (BIS) molecules as chemical cross-linkers to generate a relatively homogeneous structure with flexible long polymer chains and rare chemically cross-linked dense clusters. Moreover, the oxidized groups of GO nanosheets enable the formation of a hydrogen bond interaction with the amide groups of PNIPAM chains, which could physically cross-link the PNIPAM chains to increase the toughness of the hydrogel networks. The prepared PNIPAM-GO nanocomposite hydrogels with ultrahigh tensibility exhibit rapid, reversible, and repeatable NIR light-responsive properties, which are highly promising for fabricating remote light-controlled devices, smart actuators, artificial muscles, and so on.

A novel and facile assembly strategy has been successfully developed to construct smart nanocomposite (NC) hydrogels with inhomogeneous structures using nanoclay-cross-linked stimuli-responsive hydrogel subunits as building blocks via rearranged hydrogen bonding between polymers and clay nanosheets. The assembled thermoresponsive poly(N-isopropylacrylamide-co-acrylamide) (poly(NIPAM-co-AM)) hydrogels with various inhomogeneous structures exhibit excellent mechanical properties due to plenty of new hydrogen bonding interactions created at the interface for locking the NC hydrogel subunits, which are strong enough to tolerate external forces such as high levels of elongations and multicycles of swelling/deswelling operations. The proposed approach is featured with flexibility and designability to build assembled hydrogels with diverse architectures for achieving various responsive deformations, which are highly promising for stimuli-responsive manipulation such as actuation, encapsulation, and cargo transportation. Our assembly strategy creates new opportunities for further developing mechanically strong hydrogel systems with complex architectures that composed of diverse internal structures, multistimuli-responsive properties, and controllable shape deformation behaviors in the soft robots and actuators fields.

A simple and flexible approach is developed for controllable fabrication of spider-silk-like microfibers with tunable magnetic spindle-knots from biocompatible calcium alginate for controlled 3D assembly and water collection. Liquid jet templates with volatile oil drops containing magnetic Fe3O4 nanoparticles are generated from microfluidics for fabricating spider-silk-like microfibers. The structure of jet templates can be precisely adjusted by simply changing the flow rates to tailor the structures of the resultant spider-silk-like microfibers. The microfibers can be well manipulated by external magnetic fields for controllably moving, and patterning and assembling into different 2D and 3D structures. Moreover, the dehydrated spider-silk-like microfibers, with magnetic spindle-knots for collecting water drops, can be controllably assembled into spider-web-like structures for excellent water collection. These spider-silk-like microfibers are promising as functional building blocks for engineering complex 3D scaffolds for water collection, cell culture, and tissue engineering.