Rajesh Bashyam

A series of C-doped, W-doped, and C,W-codoped TiO2 samples have been prepared using modified sol-gel techniques. Reproducible inexpensive C-doping arises from the presence of melamine borate in a sol-gel mixture, whereas W-doping is from the addition of tungstic acid to the sol. The materials have been characterized using elemental analysis, N-2 physisorption (BET), thermogravimetric analysis, X-ray diffraction, Raman, X-ray photoelectron, UV-vis spectroscopies, and photocatalytic activity measurements. Doping C and W independently results in an increased absorbance in the visible region of the spectrum with a synergistic effect in increased absorbance when both elements are codoped. The increased visible-light absorbance of the W-doped or codoped materials is not reflected in photocatalytic activity. Visible-light-induced photocatalytic activity of C-doped material was superior to that of an undoped catalyst, paving the way for its application under only visible-light irradiation conditions. A significant fraction of the spectral red shift commonly observed with doped catalysts might be due to the formation of color centers as a result of defects associated with oxygen vacancies, and bandgap-related narrowing or intragap localization of dopant levels are not the only factors responsible for enhanced visible-light absorption in doped photocatalysts. Furthermore, bandgap narrowing through increases in the energy of the valence band may actually decrease photo-oxidation activity through a curtailment of one route of oxidation.

Pt nanoparticle-supported conducting nanotubules of polypyrrole prepared by a template method exhibited excellent catalytic activity and stability for the electrooxidation of methanol in comparison to Pt supported on conventionally synthesised conducting polypyrrole.

The commercial success of the polymer electrolyte fuel cell (PEFC) will to a large extent be determined by the nature, properties, functionality, and cost of the electrochemical sub-components used in the membrane electrode assembly (MEA). Materials research activities in Switzerland for the PEFC are being pursued at the Paul Scherrer Institut (Villigen AG) and the Swiss Federal Institute of Technology in Lausanne with different objectives. The radiation grafted proton exchange membrane developed at the Paul Scherrer Institut (PSI) has been brought to a near-product-like quality level with encouraging performance close to state-of-the-art materials and a life-time of several thousand hours. Furthermore, the membrane shows low methanol crossover in the direct methanol fuel cell. In addition, polyarylene block copolymer membranes have been investigated as an option for fluorine-free membranes. The electrocatalysis of Pt in acidic solution and in contact with a solid electrolyte, the development of new methanol oxidation and oxygen reduction catalysts, and co-sputtering of Pt and carbon as an alternative method for catalyst preparation are areas of fundamental research. More applied research is performed in the characterization of commercial electrodes in single cells, using standard as well as advanced diagnostic tools developed in-house. This article gives an overview over the research and development projects in Switzerland related to materials and components for the PEFC.