Vinod Mathew

In the present study, an in-depth investigation on the structural transformation in a mesoporous γ-MnO2 cathode during electrochemical reaction in a zinc-ion battery (ZIB) has been undertaken. A combination of in situ Synchrotron XANES and XRD studies reveal that the tunnel-type parent γ-MnO2 undergoes a structural transformation to spinel-type Mn(III) phase (ZnMn2O4) and two new intermediary Mn(II) phases, namely, tunnel-type γ-ZnxMnO2 and layered-type L-ZnyMnO2, and that these phases with multioxidation states coexist after complete electrochemical Zn-insertion. On successive Zn-deinsertion/extraction, a majority of these phases with multioxidation states is observed to revert back to the parent γ-MnO2 phase. The mesoporous γ-MnO2 cathode, prepared by a simple ambient temperature strategy followed by low-temperature annealing at 200 °C, delivers an initial discharge capacity of 285 mAh g–1 at 0.05 mA cm–2 with a defined plateau at around 1.25 V vs Zn/Zn2+. Ex situ HR-TEM studies of the discharged electrode aided to identify the lattice fringe widths corresponding to the Mn(III) and Mn(II) phases, and the stoichiometric composition estimated by ICP analysis appears to be concordant with the in situ findings. Ex situ XRD studies also confirmed that the same electrochemical reaction occurred on repeated discharge/charge cycling. Moreover, the present synthetic strategy offers solutions for developing cost-effective and environmentally safe nanostructured porous electrodes for cheap and eco-friendly batteries.

Rechargeable zinc-ion batteries (ZIBs) with high energy densities appear promising to meet the increasing demand for safe and sustainable energy storage devices. However, electrode research on this low-cost and green system are faced with stiff challenges of identifying materials that permit divalent ion-intercalation/deintercalation. Herein, we present layered-type LiV3O8 (LVO) as a prospective intercalation cathode for zinc-ion batteries (ZIBs) with high storage capacities. The detailed phase evolution study during Zn intercalation using electrochemistry, in situ XRD, and simulation techniques reveals the large presence of a single-phase domain that proceeds via a stoichiometric ZnLiV3O8 phase to reversible solid–solution ZnyLiV3O8 (y > 1) phase. The unique behavior, which is different from the reaction with lithium, contributes to high specific capacities of 172 mAh g–1 and amounts to 75% retention of the maximum capacity achieved in 65 cycles with 100% Coulombic efficiency at a current density of 133 mA g–1. The remarkable performance makes the development of this low-cost and safe battery technology very promising, and this study also offers opportunities to enhance the understanding on electrochemically induced metastable phases for energy storage applications.

Owing to their safety and low cost, aqueous rechargeable Zn-ion batteries (ARZIBs) are currently more feasible for grid-scale applications, as compared to their alkali counterparts such as lithium- and sodium-ion batteries (LIBs and SIBs), for both aqueous and nonaqueous systems. However, the materials used in ARZIBs have a poor rate capability and inadequate cycle lifespan, serving as a major handicap for long-term storage applications. Here, we report vanadium-based Na2V6O16·3H2O nanorods employed as a positive electrode for ARZIBs, which display superior electrochemical Zn storage properties. A reversible Zn2+-ion (de)intercalation reaction describing the storage mechanism is revealed using the in situ synchrotron X-ray diffraction technique. This cathode material delivers a very high rate capability and high capacity retention of more than 80% over 1000 cycles, at a current rate of 40C (1C = 361 mA g–1). The battery offers a specific energy of 90 W h kg–1 at a specific power of 15.8 KW kg–1, enlightening the material advantages for an eco-friendly atmosphere.

The development of new battery technologies requires them to be well-established given the competition from lithium ion batteries (LIBs), a well-commercialized technology, and the merits should surpass other available technologies’ characteristics for battery applications. Aqueous rechargeable zinc ion batteries (ARZIBs) represent a budding technology that can challenge LIBs with respect to electrochemical features because of the safety, low cost, high energy density, long cycle life, high-volume density, and stable water-compatible features of the metal zinc anode. Research on ARZIBs utilizing mild acidic electrolytes is focused on developing cathode materials with complete utilization of their electro-active materials. This progress is, however, hindered by persistent issues and consequences of divergent electrochemical mechanisms, unwanted side reactions, and unresolved proton insertion phenomena, thereby challenging ARZIB commercialization for large-scale energy storage applications. Herein, we broadly review two important cathodes, manganese and vanadium oxides, that are witnessing rapid progress toward developing state-of-the-art ARZIB cathodes.