Cited by 894
National Tsing Hua University
Publishes on Carbon Nanotubes in Composites, Graphene research and applications, Advanced Sensor and Energy Harvesting Materials. 24 papers and 3.1k citations.
Add your photo, update your bio, and get notified when your ranking changes.
This study proposes an effective approach using in situpolymerization, to fabricate large-area graphene oxide (GO)/polyimide (PI) composite films with outstanding mechanical properties. The GO/PI composite films provide ultrahigh tensile strength (up to 844 MPa) and Young's modulus (20.5 GPa). The NH2-functionalized GO (ODA-GO) is a versatile starting platform for polymer grafting, promoting excellent dispersion of GO within the polymer matrix, and forming strong links with the polymer to facilitate load transfer. The Young's modulus of the integrated GO–PI composite films with 3.0 wt% ODA-GO loading is 15 times greater, and the tensile strength is 9 times greater than comparable properties of pure PI film. The dielectric constant decreases with increasing GO content and a dielectric constant (Dk) of 2.0 was achieved. This approach provides a strategy for developing ultrahigh performance GO–polymer composite materials.
Chemical reduction of graphite oxide (GO) to produce graphene nanosheets often results in irreversible agglomeration and precipitation. Herein, stable well-dispersed graphene sheets in solvents were obtained by simultaneous functionalization and reduction of GO under alkaline conditions, in the presence of sodium borohydride and imidazolium ionic liquids (Imi-ILs) containing two vinyl-benzyl groups. In this case, positively charged imidazolium groups of Imi-ILs underwent ion-exchange with negatively charged GO sheets and were linked to their edges, while Imi-ILs were non-covalently attached onto the large surfaces of graphene through π–π and/or cation–π stacking interactions. The vinyl-benzyl reactive sites were then copolymerized in situ with methyl methacrylate to fabricate graphene/poly(methyl methacrylate) (PMMA) composites. Functionalized graphene sheets were uniformly dispersed in the PMMA matrix and contributed to large increases in storage modulus (+58.3%) and glass transition temperature (+19.2 °C) at 2.08 vol.% loading. High electrical conductivity was also achieved at graphene loading levels beyond 1 vol.% (ca. 2.55 Sm−1) with a low percolation threshold (0.25 vol.%) for the composites. Hence, a general methodology which facilitates the development of a multifunctional advanced material has been successfully established. This can be extended to other vinyl polymer-based composites containing graphene.