Hideo Noda

Abstract Biodiesel derived from vegetable oils has drawn considerable attention with increasing environmental consciousness. We attempted continuous methanolysis of vegetable oil by an enzymatic process. Immobilized Candida antarctica lipase was found to be the most effective for the methanolysis among lipases tested. The enzyme was inactivated by shaking in a mixture containing more than 1.5 molar equivalents of methanol against the oil. To fully convert the oil to its corresponding methyl esters, at least 3 molar equivalents of methanol are needed. Thus, the reaction was conducted by adding methanol stepwise to avoid lipase inactivation. The first step of the reaction was conducted at 30°C for 10 h in a mixture of oil/methanol (1:1, mol/mol) and 4% immobilized lipase with shaking at 130 oscillations/min. After more than 95% methanol was consumed in ester formation, a second molar equivalent of methanol was added and the reaction continued for 14 h. The third molar equivalent of methanol was finally added and the reaction continued for 24 h (total reaction time, 48 h). This three‐step process converted 98.4% of the oil to its corresponding methyl esters. To investigate the stability of the lipase, the three‐step methanolysis process was repeated by transferring the immobilized lipase to a fresh substrate mixture. As a result, more than 95% of the ester conversion was maintained even after 50 cycles of the reaction (100 d).

Abstract Candida antarctica lipase is inactivated in a mixture of vegetable oil and more than 1∶2 molar equivalent of methanol against the total fatty acids. We have revealed that the inactivation was eliminated by three successive additions of 1∶3 molar equivalent of methanol and have developed a three‐step methanolysis by which over 95% of the oil triacylglycerols (TAG) were converted to their corresponding methyl esters (ME). In this study, the lipase was not inactivated even though 2∶3 molar equivalent of methanol was present in a mixture of acylglycerols (AG) and 33% ME (AG/ME33). This finding led to a two‐step methanolysis of the oil TAG: The first‐step was conducted at 30°C for 12 h with shaking in a mixture of the oil, 1∶3 molar equivalent of methanol, and 4% immobilized lipase; the second‐step reaction was done for 24 h after adding 2∶3 molar equivalent of methanol (36 h in total). The two‐step methanolysis achieved more than 95% of conversion. When two‐step reaction was repeated by transferring the immobilized lipase to a fresh substrate mixture, the enzyme could be used 70 cycles (105 d) without any decrease in the conversion. From the viewpoint of the industrial production of biodiesel fuel production, the two‐step reaction was conducted using a reactor with impeller. However, the enzyme carrier was easily destroyed, and the lipase could be used only several times. Thus, we attempted flow reaction using a column packed with immobilized Candida lipase. Because the lipase packed in the column was drastically inactivated by feeding a mixture of AG/ME33 and 2∶3 molar equivalent of methanol, three‐step flow reaction was performed using three columns packed with 3.0 g immobilized lipase. A mixture of vegetable oil and 1∶3 molar equivalent of methanol was fed into the first column at a constant flow rate of 6.0 mL/h. The eluate and 1∶3 molar equivalent of methanol were mixed and then fed into the second column at the same flow rate. The final step reaction was done by feeding a mixture of eluate from the second column and 1∶3 molar equivalent of methanol at the same flow rate. The ME content in the final‐step eluate reached 93%, and the lipase could be used for 100 d without any decrease in the conversion.