Xiaobin Chen

The power conversion efficiencies (PCEs) of flexible organic solar cells (OSCs) still lag behind those of rigid devices and their mechanical stability is unable to meet the needs of flexible electronics at present due to the lack of a high-performance flexible transparent electrode (FTE). Here, a so-called "welding" concept is proposed to design an FTE with tight binding of the upper electrode and the underlying substrate. The upper electrode consisting of solution-processed Al-doped ZnO (AZO) and silver nanowire (AgNW) network is well welded by utilizing the capillary force effect and secondary growth of AZO, leading to a reduction of the AgNWs junction site resistance. Meanwhile, the poly(ethylene terephthalate) is modified by embedding the AgNWs, which are then used to link with the AgNWs in the upper hybrid electrode, thus enhancing the adhesion of the electrode to the substrate. By this welding strategy, critical bottleneck issues relating to the FTEs in terms of optoelectronic and mechanical properties are comprehensively addressed. The single-junction flexible OSCs based on this welded FTE show a high performance, achieving a record high PCE of 15.21%. In addition, the PCEs of the flexible OSCs are less influenced by the device area and display robust bending durability even under extreme test conditions.

Solution processable flexible transparent electrodes (FTEs) are urgently needed to boost the efficiency and mechanical stability of flexible organic solar cells (OSCs) on a large scale. However, how to balance the optoelectronic properties and meanwhile achieve robust mechanical behavior of FTEs is still a huge challenge. Silver nanowire (AgNW) electrodes, exhibiting easily tuned optoelectronic/mechanical properties, are attracting considerable attention, but their poor contacts at the junction site of the AgNWs increase the sheet resistance and reduce mechanical stability. In this study, an ionic liquid (IL)-type reducing agent containing Cl– and a dihydroxyl group was employed to control the reduction process of silver (Ag) in AgNW-based FTEs precisely. The Cl– in the IL regulates the Ag+ concentration through the formation and dissolution of AgCl, whereas the dihydroxyl group slowly reduces the released Ag+ to form metal Ag. The reduced Ag grew in situ at the junction site of the AgNWs in a twin-crystal growth mode, facilitating an atomic-level contact between the AgNWs and the reduced Ag. This enforced atomic-level contact decreased the sheet resistance, and enhanced the mechanical stability of the FTEs. As a result, the single-junction flexible OSCs based on this chemically welded FTE achieved record power conversion efficiencies of 17.52% (active area: 0.062 cm2) and 15.82% (active area: 1.0 cm2). These flexible devices also displayed robust bending and peeling durability even under extreme test conditions.

Cartilage is difficult to self-repair and it is more challenging to repair an osteochondral defects concerning both cartilage and subchondral bone. Herein, it is hypothesized that a bilayered porous scaffold composed of a biomimetic gelatin hydrogel may, despite no external seeding cells, induce osteochondral regeneration in vivo after being implanted into mammal joints. This idea is confirmed based on the successful continuous 3D-printing of the bilayered scaffolds combined with the sol-gel transition of the aqueous solution of a gelatin derivative (physical gelation) and photocrosslinking of the gelatin methacryloyl (gelMA) macromonomers (chemical gelation). At the direct printing step, a nascent physical hydrogel is extruded, taking advantage of non-Newtonian and thermoresponsive rheological properties of this 3D-printing ink. In particular, a series of crosslinked gelMA (GelMA) and GelMA-hydroxyapatite bilayered hydrogel scaffolds are fabricated to evaluate the influence of the spacing of 3D-printed filaments on osteochondral regeneration in a rabbit model. The moderately spaced scaffolds output excellent regeneration of cartilage with cartilaginous lacunae and formation of subchondral bone. Thus, tricky rheological behaviors of soft matter can be employed to improve 3D-printing, and the bilayered hybrid scaffold resulting from the continuous 3D-printing is promising as a biomaterial to regenerate articular cartilage.