Zhiyuan Zhang

Abstract Direct seawater electrolysis is promising for sustainable hydrogen gas (H 2 ) production. However, the chloride ions in seawater lead to side reactions and corrosion, which result in a low efficiency and poor stability of the electrocatalyst and hinder the use of seawater electrolysis technology. Here we report a corrosion-resistant RuMoNi electrocatalyst, in which the in situ-formed molybdate ions on its surface repel chloride ions. The electrocatalyst works stably for over 3000 h at a high current density of 500 mA cm −2 in alkaline seawater electrolytes. Using the RuMoNi catalyst in an anion exchange membrane electrolyzer, we report an energy conversion efficiency of 77.9% and a current density of 1000 mA cm −2 at 1.72 V. The calculated price per gallon of gasoline equivalent (GGE) of the H 2 produced is $ 0.85, which is lower than the 2026 technical target of $ 2.0/GGE set by the United Stated Department of Energy, thus, suggesting practicability of the technology.

Bone tissue is a highly vascularized tissue and concomitant development of the vascular system and mineralized matrix requires a synergistic interaction between osteogenesis and angioblasts. Several strategies have been applied to achieve vascularized tissue-engineered bone, including the addition of cytokines as well as pre-vascularization strategies and co-culture systems. However, the scaffold is another extremely important component to consider, and development of vascularized bone scaffolds remains one of the greatest challenges for engineering clinically relevant bone substitutes. Here, this review highlights the biomaterial selection, preparation of pre-vascularized scaffolds, composition modification of the scaffold, structural design, and the comprehensive use of the above synergistic modifications of scaffold materials for vascular scaffolds in bone tissue engineering. Moreover, a strategy is proposed for the design of future scaffold structures, in which promoting the regeneration of vascularized bone by regulating the microenvironment should be the main focus. This overview can help illuminate progress in this field and identify the most recently developed scaffolds that show the greatest potential for achieving clinically vascularized bone.

Electrochemical CO2 reduction reaction (CO2RR) in acid can solve alkalinity issues while highly corrosive and reductive acidic electrolytes usually cause catalyst degradation. Inhibiting catalyst degradation is crucial for the stability of acidic CO2RR. Here, we reveal the microenvironment changes of dynamic Bi-based catalysts and develop a pulse chronoamperometry (CA) strategy to improve the stability of acidic CO2RR. In situ fluorescence mappings show that the local pH changes from neutral to acid, and the in situ Raman spectra reveal the dynamic evolution of interfacial water structures in the microenvironment. We propose that the surface charge properties of dynamic catalysts affect the competitive adsorption of K+ and protons, thereby causing the differences in local pH and CO2RR intermediate adsorption. We also develop a pulse CA strategy to reactivate catalysts, and the stability of acidic CO2RR is improved by 2 orders of magnitude for 100 h operation, which is higher than most reports on the stability of acidic CO2RR. This work gives insights on how microenvironment changes affecting the stability of acidic CO2RR, and provides guidance for designing stable catalysts in acidic electrolytes.

We demonstrate a very strong magnetic resonance in metamaterials for high-performance sensing. The metamaterials comprise a periodic array of a pair of closely spaced metal nanodisks that are placed on metal substrate. The strong magnetic resonance is essentially an antisymmetric resonant mode resulting from the near-field plasmon hybridization within the pair of metal nanodisks. Because the magnetic resonance has great electromagnetic field enhancement, ultra-narrow bandwidth and nearly perfect absorption, the metamaterials have very high sensitivity (S = 991 nm/RIU, S* = 47/RIU) and figure of merit (FOM = 124, FOM* = 17 702), which may find potential applications in label-free biosensing.

Titanium (Ti) is the widely used implant material in clinic, however, failures still frequently occur due to its bioinertness and poor antibacterial property. To improve the biological and antibacterial properties of Ti implants, micro-nanostructured hydroxyapatite (HA) coating was prepared on Ti surface by micro-arc oxidation (MAO), and then the antibacterial agent of chitosan (CS) was loaded on the HA surface through dip-coating method. The results showed that the obtained HA/CS composite coating accelerated the formation of apatite layer in SBF solution, enhanced cell adhesion, spreading and proliferation, and it also inhibited the bacterial growth, showing improved biological and antibacterial properties. Although, with the increased CS amount, the coverage of HA coating would be enlarged, resulting in depressed biological property, however, the antibacterial property of the composite coating was enhanced, and the cytotoxicity about CS was not detected in this work. In conclusion, the HA/CS coating has promising application in orthopedics, dentistry and other biomedical devices.