Victor V. Sysoev

The electrical properties of reduced graphene oxide (rGO) have been previously shown to be very sensitive to surface adsorbates, thus making rGO a very promising platform for highly sensitive gas sensors. However, poor selectivity of rGO-based gas sensors remains a major problem for their practical use. In this paper, we address the selectivity problem by employing an array of rGO-based integrated sensors instead of focusing on the performance of a single sensing element. Each rGO-based device in such an array has a unique sensor response due to the irregular structure of rGO films at different levels of organization, ranging from nanoscale to macroscale. The resulting rGO-based gas sensing system could reliably recognize analytes of nearly the same chemical nature. In our experiments rGO-based sensor arrays demonstrated a high selectivity that was sufficient to discriminate between different alcohols, such as methanol, ethanol and isopropanol, at a 100% success rate. We also discuss a possible sensing mechanism that provides the basis for analyte differentiation.

Fabrication, characterization, and tests of the practical gradient microarray electronic nose with SnO(2) nanowire gas-sensing elements are reported. This novel device has demonstrated an excellent performance as a gas sensor and e-nose system capable of promptly detecting and reliably discriminating between several reducing gases in air at a ppb level of concentration. It has been found that, in addition to the temperature gradient across the nanowire layer, the density and morphological inhomogeneities of nanowire mats define the discriminating power of the electronic nose.

The array of chemiresistors made of individual pristine SnO2, surface doped (Ni)-SnO2 nanowires, and TiO2 and In2O3 mesoscopic whiskers was fabricated on a Si/SiO2 wafer. Their conductance was measured under pulses of H2 and CO reducing gases in oxygen as background gas. The nanostructures were shown to be n-type semiconductors possessing high sensitivity to the target gases. Following the "electronic nose" concept, correlation analysis of response of three-chemiresistor array is shown to be sufficient to discriminate between H2 and CO signals.

With the development of internet of things and artificial intelligence electronics, metal oxide semiconductor (MOS)-based sensing materials have attracted increasing attention from both fundamental research and practical applications. MOS materials possess intrinsic physicochemical properties, tunable compositions, and electronic structure, and are particularly suitable for integration and miniaturization in developing chemiresistive gas sensors. During sensing processes, the dynamic gas-solid interface interactions play crucial roles in improving sensors' performance, and most studies emphasize the gas-MOS chemical reactions. Herein, from a new view angle focusing more on physical gas-solid interactions during gas sensing, basic theory overview and latest progress for the dynamic process of gas molecules including adsorption, desorption, and diffusion, are systematically summarized and elucidated. The unique electronic sensing mechanisms are also discussed from various aspects including molecular interaction models, gas diffusion mechanism, and interfacial reaction behaviors, where structure-activity relationship and diffusion behavior are overviewed in detail. Especially, the surface adsorption-desorption dynamics are discussed and evaluated, and their potential effects on sensing performance are elucidated from the gas-solid interfacial regulation perspective. Finally, the prospect for further research directions in improving gas dynamic processes in MOS gas sensors is discussed, aiming to supplement the approaches for the development of high-performance MOS gas sensors.

Narrow atomically precise graphene nanoribbons hold great promise for electronic and optoelectronic applications, but the previously demonstrated nanoribbon-based devices typically suffer from low currents and mobilities. In this study, we explored the idea of lateral extension of graphene nanoribbons for improving their electrical conductivity. We started with a conventional chevron graphene nanoribbon, and designed its laterally extended variant. We synthesized these new graphene nanoribbons in solution and found that the lateral extension results in decrease of their electronic bandgap and improvement in the electrical conductivity of nanoribbon-based thin films. These films were employed in gas sensors and an electronic nose system, which showed improved responsivities to low molecular weight alcohols compared to similar sensors based on benchmark graphitic materials, such as graphene and reduced graphene oxide, and a reliable analyte recognition. This study shows the methodology for designing new atomically precise graphene nanoribbons with improved properties, their bottom-up synthesis, characterization, processing and implementation in electronic devices.Atomically precise graphene nanoribbons are a promising platform for tailored electron transport, yet they suffer from low conductivity. Here, the authors devise a strategy to laterally extend conventional chevron nanoribbons, thus achieving increased electrical conductivity and improved chemical sensing capabilities.