Shoujian Gao

Abstract Nanofiltration (NF) membranes with ultrahigh permeance and high rejection are highly beneficial for efficient desalination and wastewater treatment. Improving water permeance while maintaining the high rejection of state-of-the-art thin film composite (TFC) NF membranes remains a great challenge. Herein, we report the fabrication of a TFC NF membrane with a crumpled polyamide (PA) layer via interfacial polymerization on a single-walled carbon nanotubes/polyether sulfone composite support loaded with nanoparticles as a sacrificial templating material, using metal-organic framework nanoparticles (ZIF-8) as an example. The nanoparticles, which can be removed by water dissolution after interfacial polymerization, facilitate the formation of a rough PA active layer with crumpled nanostructure. The NF membrane obtained thereby exhibits high permeance up to 53.5 l m −2 h −1 bar −1 with a rejection above 95% for Na 2 SO 4 , yielding an overall desalination performance superior to state-of-the-art NF membranes reported so far. Our work provides a simple avenue to fabricate advanced PA NF membranes with outstanding performance.

Abstract Fouling caused by oil and other pollutants is one of the most serious challenges for membranes used for oil/water separation. Aiming at improving the comprehensive antifouling property of membranes and thus achieving long‐term cyclic stability, it is reported in this work the design of a kind of zwitterionic nanosized hydrogels grafted poly(vinylidene fluoride) (PVDF) microfiltration membrane (ZNG‐g‐PVDF) with superior fouling‐tolerant property for oil‐in‐water emulsion separation. Sulfobetaine zwitterionic nanohydrogels with the diameter of ≈ 50 nm are synthesized by an inverse microemulsion polymerization process. They are then grafted onto the surface of PVDF microfiltration membrane, endowing the membrane a superhydrophilic and nearly zero oil adhesion property. This ZNG‐g‐PVDF membrane exhibits great tolerance and resistance to salts pH, especially an excellent antifouling property to oil‐in‐water emulsions containing various pollutants such as surfactants, proteins, and natural organic materials (e.g., humic acid). The comprehensive antifouling property of the membrane gives rise to the cyclic stability of the membrane greatly improved. A nearly 100% recovery ratio of permeating flux is achieved during several cycles of oil‐in‐water emulsion filtration. The ZNG‐g‐PVDF membrane shows great potential in treating practical oily wastewater containing complicated components in the effluent.

A polyionized hydrogel polymer (sodium polyacrylate-grafted poly(vinylidene fluoride) (PAAS-g-PVDF)) is fabricated via an alkaline-induced phase-inversion process. PAAS-g-PVDF coatings exhibit unprecedented anti-adhesion and self-cleaning properties to crude oils under an aqueous environment. A PAAS-g-PVDF-coated copper mesh can effectively separate a crude oil/water mixture with extremely high flux and high oil rejection driven by gravity, and is oil-fouling-free for long-term use. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Developing an effective and sustainable solution for cleaning up or separating oily water is highly desired. In this work, we report a completely inorganic mesh membrane made up of cupric phosphate (Cu3(PO4)2) in a special intersected nanosheets-constructed structure. Combing the hierarchical structure with strong hydration ability of Cu3(PO4)2, the nanosheets-wrapped membrane exhibits a superior superhydrophilic and underwater anti-oil-fouling and antibio-fouling property for efficient oil/water separation to various viscous oils such as heavy diesel oil, light crude oil, and even heavy crude oil with underwater oil contact angles (CAs) all above 158° and nearly zero underwater oil adhesive force even when a large preload force of up to 400 μN was applied on the oil droplet. Simultaneously, the membrane exhibits a high chemical and thermal stability and outstanding salt tolerance. Continuous separation operated on a cross-flow filtration apparatus demonstrates a large separation capacity and long-term stability of the membrane during treating a 2000 L crude oil/water mixture with constantly stable permeating flux of ∼4000 L/m2 h and oil content in the filtrate below 2 ppm. The excellent anti-oil-fouling property, high separation capacity, and easily scaled-up preparation process of the membrane show great potential for practical application in treating oily wastewater.

A SWCNT/TiO2 nanocomposite ultrathin film that has superhydrophilic and underwater superoleophobic properties after UV-light irradiation is successfully prepared by coating TiO2 via the sol-gel process onto an SWCNT ultrathin network film. The robust and flexible SWCNT/TiO2 nanocomposite films with a thickness and pore size of tens of nanometers can separate both surfactant-free and surfactant-stabilized oil-in-water emulsions in an ultrafast manner with fluxes up to 30 000 L m(-2) h(-1) bar(-1), which is 2 orders of magnitude higher than commercial filtration membranes with similar separation performance, and with high separation efficiency. Most importantly, the films exhibit excellent antifouling and self-cleaning performance during multiple cycles with the aid of the photocatalytic property of TiO2 nanoparticles. This work provides a route for designing ultrathin and superwetting films for effective separation of oil-in-water emulsions. The SWCNT/TiO2 ultrathin film is potentially useful in treating emulsified wastewater produced in industry and daily life and for purification of crude oil and fuel.