Bruce Dunn

The increasing interest in energy storage for the grid can be attributed to multiple factors, including the capital costs of managing peak demands, the investments needed for grid reliability, and the integration of renewable energy sources. Although existing energy storage is dominated by pumped hydroelectric, there is the recognition that battery systems can offer a number of high-value opportunities, provided that lower costs can be obtained. The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.

Electrochemical measurements can distinguish between different types of energy storage materials and their underlying mechanisms.

Electrochemical energy storage technology is based on devices capable of exhibiting high energy density (batteries) or high power density (electrochemical capacitors). There is a growing need, for current and near-future applications, where both high energy and high power densities are required in the same material. Pseudocapacitance, a faradaic process involving surface or near surface redox reactions, offers a means of achieving high energy density at high charge–discharge rates. Here, we focus on the pseudocapacitive properties of transition metal oxides. First, we introduce pseudocapacitance and describe its electrochemical features. Then, we review the most relevant pseudocapacitive materials in aqueous and non-aqueous electrolytes. The major challenges for pseudocapacitive materials along with a future outlook are detailed at the end.

The advantages in using nanostructured materials for electrochemical energy storage have largely focused on the benefits associated with short path lengths. In this paper, we consider another contribution, that of the capacitive effects, which become increasingly important at nanoscale dimensions. Nanocrystalline TiO2 (anatase) was studied over a dimensional regime where both capacitive and lithium intercalation processes contribute to the total stored charge. An analysis of the voltammetric sweep data was used to distinguish between the amount of charge stored by these two processes. At particle sizes below 10 nm, capacitive contributions became increasingly important, leading to greater amounts of total stored charge (gravimetrically normalized) with decreasing TiO2 particle size. The area normalized capacitance was determined to be well above 100 μF/cm2, confirming that the capacitive contribution was pseudocapacitive in nature. Moreover, reducing the particle size to the nanoscale regime led to faster charge/discharge rates because the diffusion-controlled lithium ion intercalation process was replaced by faradaic reactions which occur at the surface of the material. The charge storage and kinetics benefits derived from using nanoscale metal oxides provide an interesting direction for the design of materials that offer both power density and energy density.