Ludwig K. Limbach

Early indicators for nanoparticle-derived adverse health effects should provide a relative measure for cytotoxicity of nanomaterials in comparison to existing toxicological data. We have therefore evaluated a human mesothelioma and a rodent fibroblast cell line for in vitro cytotoxicity tests using seven industrially important nanoparticles. Their response in terms of metabolic activity and cell proliferation of cultures exposed to 0-30 ppm nanoparticles (microg g(-1)) was compared to the effects of nontoxic amorphous silica and toxic crocidolite asbestos. Solubility was found to strongly influence the cytotoxic response. The results further revealed a nanoparticle-specific cytotoxic mechanism for uncoated iron oxide and partial detoxification or recovery after treatment with zirconia, ceria, or titania. While in vitro experiments may never replace in vivo studies, the relatively simple cytotoxic tests provide a readily available pre-screening method.

The chemical and catalytic activity of nanoparticles has strongly contributed to the current tremendous interest in engineered nanomaterials and often serves as a guiding principle for the design of functional materials. Since it has most recently become evident that such active materials can enter into cells or organisms, the present study investigates the level of intracellular oxidations after exposure to iron-, cobalt-, manganese-, and titania-containing silica nanoparticles and the corresponding pure oxides in vitro. The resulting oxidative stress was quantitatively measured as the release of reactive oxygen species (ROS). The use of thoroughly characterized nanoparticles of the same morphology, comparable size, shape, and degree of agglomeration allowed separation of physical (rate of particle uptake, agglomeration, sedimentation) and chemical effects (oxidations). Three sets of control experiments elucidated the role of nanoparticles as carriers for heavy metal uptake and excluded a potential interference of the biological assay with the nanomaterial. The present results indicate that the particles could efficiently enter the cells by a Trojan-horse type mechanism which provoked an up to eight times higher oxidative stress in the case of cobalt or manganese if compared to reference cultures exposed to aqueous solutions of the same metals. A systematic investigation on iron-containing nanoparticles as used in industrial fine chemical synthesis demonstrated that the presence of catalytic activity could strongly alter the damaging action of a nanomaterial. This indicates that a proactive development of nanomaterials and their risk assessment should consider chemical and catalytic properties of nanomaterials beyond a mere focus on physical properties such as size, shape, and degree of agglomeration.

Quantitative studies on the uptake of nanoparticles into biological systems should consider simultaneous agglomeration, sedimentation, and diffusion at physiologically relevant concentrations to assess the corresponding risks of nanomaterials to human health. In this paper, the transport and uptake of industrially important cerium oxide nanoparticles, into human lung fibroblasts is measured in vitro after exposing thoroughly characterized particle suspensions to a fibroblast cell culture for particles of four separate size fractions and concentrations ranging from 100 ng g(-1) to 100 microg g(-1) of fluid (100 ppb to 100 ppm). The unexpected findings at such low but physiologically relevant concentrations reveal a strong dependence of the amount of incorporated ceria on particle size, while nanoparticle number density or total particle surface area are of minor importance. These findings can be explained on the basis of a purely physical model. The rapid formation of agglomerates in the liquid is strongly favored for small particles due to a high number density while larger ones stay mainly unagglomerated. Diffusion (size fraction 25-50 nm) or sedimentation (size fraction 250-500 nm) limits the transport of nanoparticles to the fibroblast cells. The biological uptake processes on the surface of the cell are faster than the physical transport to the cell at such low concentrations. Comparison of the colloid stability of a series of oxide nanoparticles reveals that untreated oxide suspensions rapidly agglomerate in biological fluids and allows the conclusion thatthe presented transport and uptake kinetics at low concentrations may be extended to other industrially relevant materials.

The rapidly increasing production of engineered nanoparticles has created a demand for particle removal from industrial and communal wastewater streams. Efficient removal is particularly important in view of increasing long-term persistence and evidence for considerable ecotoxicity of specific nanoparticles. The present work investigates the use of a model wastewater treatment plant for removal of oxide nanoparticles. While a majority of the nanoparticles could be captured through adhesion to clearing sludge, a significant fraction of the engineered nanoparticles escaped the wastewater plant's clearing system, and up to 6 wt % of the model compound cerium oxide was found in the exit stream of the model plant. Our study demonstrates a significant influence of surface charge and the addition of dispersion stabilizing surfactants as routinely used in the preparation of nanoparticle derived products. A detailed investigation on the agglomeration of oxide nanoparticles in wastewater streams revealed a high stabilization of the particles against clearance (adsorption on the bacteria from the sludge). This unexpected finding suggests a need to investigate nanoparticle clearance in more detail and demonstrates the complex interactions between dissolved species and the nanoparticles within the continuously changing environment of the clearing sludge.