Shiwen He

With the demanding system requirements for the fifth-generation (5G) wireless communications and the severe spectrum shortage at conventional cellular frequencies, multibeam antenna systems operating in the millimeter-wave frequency bands have attracted a lot of research interest and have been actively investigated. They represent the key antenna technology for supporting a high data transmission rate, an improved signal-to-interference-plus-noise ratio, an increased spectral and energy efficiency, and versatile beam shaping, thereby holding a great promise in serving as the critical infrastructure for enabling beamforming and massive multiple-input multiple-output (MIMO) that boost the 5G. This paper provides an overview of the existing multibeam antenna technologies which include the passive multibeam antennas (MBAs) based on quasi-optical components and beamforming circuits, multibeam phased-array antennas enabled by various phase-shifting methods, and digital MBAs with different system architectures. Specifically, their principles of operation, design, and implementation, as well as a number of illustrative application examples are reviewed. Finally, the suitability of these MBAs for the future 5G massive MIMO wireless systems as well as the associated challenges is discussed.

Sending data to the cloud for analysis was a prominent trend during the past decades, driving cloud computing as a dominant computing paradigm. However, the dramatically increasing number of devices and data traffic in the Internet-of-Things (IoT) era are posing significant burdens on the capacity-limited Internet and uncontrollable service delay. It becomes difficult to meet the delay-sensitive and context-aware service requirements of IoT applications by using cloud computing alone. Facing these challenges, computing paradigms are shifting from the centralized cloud computing to distributed edge computing. Several new computing paradigms, including Transparent Computing, Mobile Edge Computing, Fog Computing, and Cloudlet, have emerged to leverage the distributed resources at network edge to provide timely and context-aware services. By integrating end devices, edge servers, and cloud, they form a hierarchical IoT architecture, i.e., End-Edge-Cloud orchestrated architecture to improve the performance of IoT systems. This article presents a comprehensive survey of these emerging computing paradigms from the perspective of end-edge-cloud orchestration. Specifically, we first introduce and compare the architectures and characteristics of different computing paradigms. Then, a comprehensive survey is presented to discuss state-of-the-art research in terms of computation offloading, caching, security, and privacy. Finally, some potential research directions are envisioned for fostering continuous research efforts.

Non-orthogonal multiple access (NOMA) enables power-domain multiplexing via successive interference cancellation (SIC) and has been viewed as a promising technology for 5G communication. The full benefit of NOMA depends on resource allocation, including power allocation and channel assignment, for all users, which, however, leads to mixed integer programs. In the literature, the optimal power allocation has only been found in some special cases, while the joint optimization of power allocation and channel assignment generally requires exhaustive search. In this paper, we investigate resource allocation in downlink NOMA systems. As the main contribution, we analytically characterize the optimal power allocation with given channel assignment over multiple channels under different performance criteria. Specifically, we consider the maximin fairness, weighted sum rate maximization, sum rate maximization with quality of service (QoS) constraints, and energy efficiency maximization with weights or QoS constraints in NOMA systems. We also take explicitly into account the order constraints on the powers of the users on each channel, which are often ignored in the existing works, and show that they have a significant impact on SIC in NOMA systems. Then, we provide the optimal power allocation for the considered criteria in closed or semi-closed form. We also propose a low-complexity efficient method to jointly optimize channel assignment and power allocation in NOMA systems by incorporating the matching algorithm with the optimal power allocation. Simulation results show that the joint resource optimization using our optimal power allocation yields better performance than the existing schemes.

In millimeter-wave (mmWave) systems, antenna architecture limitations make it difficult to apply conventional fully digital precoding techniques but call for low-cost analog radio frequency (RF) and digital baseband hybrid precoding methods. This paper investigates joint RF-baseband hybrid precoding for the downlink of multiuser multiantenna mmWave systems with a limited number of RF chains. Two performance measures, maximizing the spectral efficiency and the energy efficiency of the system, are considered. We propose a codebook-based RF precoding design and obtain the channel state information via a beam sweep procedure. Via the codebook-based design, the original system is transformed into a virtual multiuser downlink system with the RF chain constraint. Consequently, we are able to simplify the complicated hybrid precoding optimization problems to joint codeword selection and precoder design (JWSPD) problems. Then, we propose efficient methods to address the JWSPD problems and jointly optimize the RF and baseband precoders under the two performance measures. Finally, extensive numerical results are provided to validate the effectiveness of the proposed hybrid precoders.

In this paper we study energy efficient joint power allocation and beamforming for coordinated multicell multiuser downlink systems. The considered optimization problem is in a non-convex fractional form and hard to tackle. We propose to first transform the original problem into an equivalent optimization problem in a parametric subtractive form, by which we reach its solution through a two-layer optimization scheme. The outer layer only involves one-dimension search for the energy efficiency parameter which can be addressed using the bi-section search, the key issue lies in the inner layer where a non-fractional sub-problem needs to tackle. By exploiting the relationship between the user rate and the mean square error, we then develop an iterative algorithm to solve it. The convergence of this algorithm is proved and the solution is further derived in closed-form. Our analysis also shows that the proposed algorithm can be implemented in parallel with reasonable complexity. Numerical results illustrate that our algorithm has a fast convergence and achieves near-optimal energy efficiency. It is also observed that at the low transmit power region, our solution almost achieves the optimal sum rate and the optimal energy efficiency simultaneously; while at the middle-high transmit power region, a certain sum rate loss is suffered in order to guarantee the energy efficiency.