Makhsud I. Saidaminov

Perovskite solar cells (PSCs) have witnessed rapidly rising power conversion efficiencies, together with advances in stability and upscaling. Despite these advances, their limited stability and need to prove upscaling remain crucial hurdles on the path to commercialization. We summarize recent advances toward commercially viable PSCs and discuss challenges that remain. We expound the development of standardized protocols to distinguish intrinsic and extrinsic degradation factors in perovskites. We review accelerated aging tests in both cells and modules and discuss the prediction of lifetimes on the basis of degradation kinetics. Mature photovoltaic solutions, which have demonstrated excellent long-term stability in field applications, offer the perovskite community valuable insights into clearing the hurdles to commercialization.

Single crystals of methylammonium lead trihalide perovskites (MAPbX3; MA = CH3NH3(+), X = Br(-) or I(-)) have shown remarkably low trap density and charge transport properties; however, growth of such high-quality semiconductors is a time-consuming process. Here we present a rapid crystal growth process to obtain MAPbX3 single crystals, an order of magnitude faster than previous reports. The process is based on our observation of the substantial decrease of MAPbX3 solubility, in certain solvents, at elevated temperatures. The crystals can be both size- and shape-controlled by manipulating the different crystallization parameters. Despite the rapidity of the method, the grown crystals exhibit transport properties and trap densities comparable to the highest quality MAPbX3 reported to date. The phenomenon of inverse or retrograde solubility and its correlated inverse temperature crystallization strategy present a major step forward for advancing the field on perovskite crystallization.

Inverted (pin) perovskite solar cells (PSCs) afford improved operating stability in comparison to their nip counterparts but have lagged in power conversion efficiency (PCE). The energetic losses responsible for this PCE deficit in pin PSCs occur primarily at the interfaces between the perovskite and the charge-transport layers. Additive and surface treatments that use passivating ligands usually bind to a single active binding site: This dense packing of electrically resistive passivants perpendicular to the surface may limit the fill factor in pin PSCs. We identified ligands that bind two neighboring lead(II) ion (Pb 2+ ) defect sites in a planar ligand orientation on the perovskite. We fabricated pin PSCs and report a certified quasi–steady state PCE of 26.15 and 24.74% for 0.05– and 1.04–square centimeter illuminated areas, respectively. The devices retain 95% of their initial PCE after 1200 hours of continuous 1 sun maximum power point operation at 65°C.

State-of-the-art perovskite solar cells with record efficiencies were achieved by replacing methylammonium (MA) with formamidinium (FA) in perovskite polycrystalline films. However, these films suffer from severe structural disorder and high density of traps; thus, the intrinsic properties of FA-based perovskites remain obscured. Here we report the detailed optical and electrical properties of FAPbX3 (where X = Br– and I–) single crystals. FAPbX3 crystals exhibited markedly enhanced transport compared not just to FAPbX3 polycrystalline films but also, surprisingly, to MAPbX3 single crystals. Particularly, FAPbBr3 crystals displayed a 5-fold longer carrier lifetime and 10-fold lower dark carrier concentration than those of MAPbBr3 single crystals. We report long carrier diffusion lengths—much longer than previously thought—of 6.6 μm for FAPbI3 and 19.0 μm for FAPbBr3 crystals, the latter being one of the longest reported values in perovskite materials. These findings are of great importance for future integrated applications of these perovskites.