Iain Staffell

Hydrogen has been ‘just around the corner’ for decades, but now offers serious alternatives for decarbonising global heat, power and transport.

The need for energy storage to balance intermittent and inflexible electricity supply with demand is driving interest in conversion of renewable electricity via electrolysis into a storable gas. But, high capital cost and uncertainty regarding future cost and performance improvements are barriers to investment in water electrolysis. Expert elicitations can support decision-making when data are sparse and their future development uncertain. Therefore, this study presents expert views on future capital cost, lifetime and efficiency for three electrolysis technologies: alkaline (AEC), proton exchange membrane (PEMEC) and solid oxide electrolysis cell (SOEC). Experts estimate that increased R&D funding can reduce capital costs by 0–24%, while production scale-up alone has an impact of 17–30%. System lifetimes may converge at around 60,000–90,000 h and efficiency improvements will be negligible. In addition to innovations on the cell-level, experts highlight improved production methods to automate manufacturing and produce higher quality components. Research into SOECs with lower electrode polarisation resistance or zero-gap AECs could undermine the projected dominance of PEMEC systems. This study thereby reduces barriers to investment in water electrolysis and shows how expert elicitations can help guide near-term investment, policy and research efforts to support the development of electrolysis for low-carbon energy systems.

footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Solar PV is rapidly growing globally, creating difficult questions around how to efficiently integrate it into national electricity grids. Its time-varying power output is difficult to model credibly because it depends on complex and variable weather systems, leading to difficulty in understanding its potential and limitations. We demonstrate how the MERRA and MERRA-2 global meteorological reanalyses as well as the Meteosat-based CM-SAF SARAH satellite dataset can be used to produce hourly PV simulations across Europe. To validate these simulations, we gather metered time series from more than 1000 PV systems as well as national aggregate output reported by transmission network operators. We find slightly better accuracy from satellite data, but greater stability from reanalysis data. We correct for systematic bias by matching our simulations to the mean bias in modeling individual sites, then examine the long-term patterns, variability and correlation with power demand across Europe, using thirty years of simulated outputs. The results quantify how the increasing deployment of PV substantially changes net power demand and affects system adequacy and ramping requirements, with heterogeneous impacts across different European countries. The simulation code and the hourly simulations for all European countries are available freely via an interactive web platform, www.renewables.ninja.

Reanalysis models are rapidly gaining popularity for simulating wind power output due to their convenience and global coverage. However, they should only be relied upon once thoroughly proven. This paper reports the first international validation of reanalysis for wind energy, testing NASA's MERRA and MERRA-2 in 23 European countries. Both reanalyses suffer significant spatial bias, overestimating wind output by 50% in northwest Europe and underestimating by 30% in the Mediterranean. We derive national correction factors, and show that after calibration national hourly output can be modelled with R2 above 0.95. Our underlying data are made freely available to aid future research. We then assess Europe's wind resources with twenty-year simulations of the current and potential future fleets. Europe's current average capacity factor is 24.2%, with countries ranging from 19.5% (Germany) to 32.4% (Britain). Capacity factors are rising due to improving technology and locations; for example, Britain's wind fleet is now 23% more productive than in 2005. Based on the current planning pipeline, we estimate Europe's average capacity factor could increase by nearly a third to 31.3%. Countries with large stakes in the North Sea will see significant gains, with Britain's average capacity factor rising to 39.4% and Germany's to 29.1%.