Elizabeth A. Croft

This study emphasizes the need for standardized measurement tools for human robot interaction (HRI). If we are to make progress in this field then we must be able to compare the results from different studies. A literature review has been performed on the measurements of five key concepts in HRI: anthropomorphism, animacy, likeability, perceived intelligence, and perceived safety. The results have been distilled into five consistent questionnaires using semantic differential scales. We report reliability and validity indicators based on several empirical studies that used these questionnaires. It is our hope that these questionnaires can be used by robot developers to monitor their progress. Psychologists are invited to further develop the questionnaires by adding new concepts, and to conduct further validations where it appears necessary.

An online method for obtaining smooth, jerk-bounded trajectories has been developed and implemented. Jerk limitation is important in industrial robot applications, since it results in improved path tracking and reduced wear on the robot. The method described herein uses a concatenation of fifth-order polynomials to provide a smooth trajectory between two way points. The trajectory approximates a linear segment with parabolic blends trajectory. A sine wave template is used to calculate the end conditions (control points) for ramps from zero acceleration to nonzero acceleration. Joining these control points with quintic polynomials results in a controlled quintic trajectory that does not oscillate, and is near time optimal for the jerk and acceleration limits specified. The method requires only the computation of the quintic control points, up to a maximum of eight points per trajectory way point. This provides hard bounds for online motion algorithm computation time. A method for blending these straight-line trajectories over a series of way points is also discussed. Simulations and experimental results on an industrial robot are presented.

This article presents a method for determining smooth and time-optimal path constrained trajectories for robotic manipulators and investigates the performance of these trajectories both through simulations and experiments. The desired smoothness of the trajectory is imposed through limits on the torque rates. The third derivative of the path parameter with respect to time, the pseudo-jerk, is the controlled input. The limits on the actuator torques translate into state-dependent limits on the pseudo-acceleration. The time-optimal control objective is cast as an optimization problem by using cubic splines to parametrize the state space trajectory. The optimization problem is solved using the flexible tolerance method. The experimental results presented show that the planned smooth trajectories provide superior feasible time-optimal motion. © 2000 John Wiley & Sons, Inc.