Xi Xie

Abstract Although multifunctional, flexible, and wearable textiles with integrated smart electronics have attracted tremendous attention in recent years, it is still an issue to balance new functionalities with the inherent performances of the textile substrates. 2D early transition metal carbides/nitrides (MXenes) are considered as ideal nanosheets for fabricating multifunctional and flexible textiles on the basis of their superb intrinsic electrical conductivity, tunable surface chemistry, and layered structure. Herein, highly conductive and hydrophobic textiles with exceptional electromagnetic interference (EMI) shielding efficiency and excellent Joule heating performance are fabricated by depositing in situ polymerized polypyrrole (PPy) modified MXene sheets onto poly(ethylene terephthalate) textiles followed by a silicone coating. The resultant multifunctional textile exhibits high electrical conductivity of ≈1000 S m −1 in conjunction with an exceptional EMI shielding efficiency of ≈90 dB at a thickness of 1.3 mm. The thin silicone coating renders the hydrophilic PPy/MXene‐decorated textile hydrophobic, leading to an excellent water‐resistant feature while retaining a satisfactory air permeability of the textile. Interestingly, the multifunctional textile also exhibits an excellent moderate voltage‐driven Joule heating performance. Thus, the deposition of PPy‐modified MXene followed by silicone coating creates a multifunctional textile that holds great promise for wearable intelligent garments, EMI shielding, and personal heating applications.

Abstract Highly conductive polymer nanocomposites are greatly desired for electromagnetic interference (EMI) shielding applications. Although transition metal carbide/carbonitride (MXene) has shown its huge potential for producing highly conductive films and bulk materials, it still remains a great challenge to fabricate extremely conductive polymer nanocomposites with outstanding EMI shielding performance at minimal amounts of MXenes. Herein, an electrostatic assembly approach for fabricating highly conductive MXene@polystyrene nanocomposites by electrostatic assembling of negative MXene nanosheets on positive polystyrene microspheres is demonstrated, followed by compression molding. Thanks to the high conductivity of MXenes and their highly efficient conducting network within polystyrene matrix, the resultant nanocomposites exhibit not only a low percolation threshold of 0.26 vol% but also a superb conductivity of 1081 S m −1 and an outstanding EMI shielding performance of >54 dB over the whole X‐band with a maximum of 62 dB at the low MXene loading of 1.90 vol%, which are among the best performances for electrically conductive polymer nanocomposites by far. Moreover, the same nanocomposite has a highly enhanced storage modulus, 54% and 56% higher than those of neat polystyrene and conventional MXene@polystyrene nanocomposite, respectively. This work provides a novel methodology to produce highly conductive polymer nanocomposites for highly efficient EMI shielding applications.

Abstract 2D transition metal carbides and nitrides (MXenes) have gained extensive attention recently due to their versatile surface chemistry, layered structure, and intriguing properties. The assembly of MXene sheets into macroscopic architectures is an important approach to harness their extraordinary properties. However, it is difficult to construct a freestanding, mechanically flexible, and 3D framework of MXene sheets owing to their weak intersheet interactions. Herein, an interfacial enhancement strategy to construct multifunctional, superelastic, and lightweight 3D MXene architectures by bridging individual MXene sheets with polyimide macromolecules is developed. The resulting lightweight aerogel exhibits superelasticity with large reversible compressibility, excellent fatigue resistance (1000 cycles at 50% strain), 20% reversible stretchability, and high electrical conductivity of ≈4.0 S m −1 . The outstanding mechanical flexibility and electrical conductivity make the aerogel promising for damping, microwave absorption coating, and flexible strain sensor. More interestingly, an exceptional microwave absorption performance with a maximum reflection loss of −45.4 dB at 9.59 GHz and a wide effective absorption bandwidth of 5.1 GHz are achieved.

Significance The obstacles limiting the practical applications of promising titanium carbide MXene macroscopic sheets are poor mechanical and oxidation-resistant properties. Herein, we demonstrate strong and highly electrically conductive MXene sheets through sequential bridging of hydrogen and ionic bonding, also achieving high shielding efficiency and excellent fatigue and oxidation resistance. The synergistic strengthening and toughening mechanism was thoroughly revealed by experiments and molecular dynamics simulations. The proposed sequential bridging strategy in this article provides an avenue for assembling high-performance MXene materials having potential applications in flexible electronic devices and aerospace in the near future.