İzzeddin Dönmez

• Effects of multi-blended binders on the fresh and hardened properties of HFRSCC are investigated. • FA, BS and LP are included into matrix to increase the workability of HFRSCC . • Relationship between the packing density and fresh/hardened properties for mixtures are also investigated. • In spite of the low PC content, it is possible to obtain HFRSCC with high strength . • Multi-blended binders are used as binary, ternary and quaternary to product eco-friendly/sustainable HFRSCC. Hybrid fiber-reinforced self-compacting concrete (HFRSCC) has been very popular in recent years due to its high mechanical, durability and flexural performance. HFRSCC properties are also closely related to its workability properties. Therefore, a high proportion of binder material is required to provide a uniform distribution of the fibers in the matrix. The use of mineral admixtures replaced by cement has a vital importance to improve especially the workability of HFRSCC mixtures, resulting in reduction of CO 2 emission because the production of 1 ton Portland cement releases about 1 ton of CO 2 . For this reason, in this study, the effects of multi-blended (binary, ternary and quaternary) binders containing Portland Cement (PC), fly ash (FA), ground granulated blast furnace slag (BS) and limestone powder (LP) on the workability (Slump-flow, T 500 , J-ring and V-funnel) and hardened (compressive, splitting tensile and flexural tensile strength) properties of HFRSCC as well as flexural performance for 7, 28 and 90 days are investigated. The first of three group mixtures in this study consists of only control mixture (Control) without fiber and mineral admixture blends (MAB), in second group there are four SCC mixtures with only MAB replaced by cement as binary, ternary, quaternary SCC-MAB and the last group also includes four SCC mixtures with both mineral admixtures same as second group and hybrid fiber (HFRSCC-MAB). The total binder amount, water/binder ratio, fine aggregate/all aggregate ratio and fiber hybridization are kept constant while the mineral admixture type and blending system are variable parameters. According to the test results, among the HFRSCC-MAB blends, the quaternary blend system performed the best in terms of workability, followed by the binary blends containing FA. In addition, when it came to ultimate strengths, hybrid fiber-reinforced samples with ternary blends performed best for compressive strength, while hybrid fiber-reinforced samples with binary blends containing FA performed best for splitting tensile and flexural tensile strengths. Finally, it has been seen that the use of various powders as multi-blended binders is a successful solution to obtain high workability for uniform distribution of fibers in HFRSCC as well as high compressive strength and flexural performance, resulting in economical, eco-friendly and sustainable composite.