K. Ramanathan

This short communication reports on achieving 18·8% total-area conversion efficiency for a ZnO/CdS/Cu(In,Ga)Se2/Mo polycrystalline thin-film solar cell. We also report a 15%-efficient, Cd-free device fabricated via physical vapor deposition methods. The Cd-free cell includes no buffer layer, and it is fabricated by direct deposition of ZnO on the Cu(In,Ga)Se2 thin-film absorber. Both results have been measured at the National Renewable Energy Laboratory under standard reporting conditions (1000 W/m2, 25°C, ASTM E 892 Global). The 18·8% conversion efficiency represents a new record for such devices (Notable Exceptions) and makes the 20% performance level by thin-film polycrystalline materials much closer to reality. We allude to the enhancement in performance of such cells as compared to previous record cells, and we discuss possible and realistic routes to enhance the performance toward the 20% efficiency level. Published in 1999 by John Wiley & Sons, Ltd. This article is a US government work and is in the public domain in the United States.

Abstract We report the growth and characterization of record‐efficiency ZnO/CdS/CuInGaSe 2 thin‐film solar cells. Conversion efficiencies exceeding 19% have been achieved for the first time, and this result indicates that the 20% goal is within reach. Details of the experimental procedures are provided, and material and device characterization data are presented. Published in 2003 by John Wiley & Sons, Ltd.

We report a new state of the art in thin-film polycrystalline Cu(In,Ga)Se2-based solar cells with the attainment of energy conversion efficiencies of 19·5%. An analysis of the performance of Cu(In,Ga)Se2 solar cells in terms of some absorber properties and other derived diode parameters is presented. The analysis reveals that the highest-performance cells can be associated with absorber bandgap values of ∼1·14 eV, resulting in devices with the lowest values of diode saturation current density (∼3×10−8 mA/cm2) and diode quality factors in the range 1·30 < A < 1·35. The data presented also support arguments of a reduced space charge region recombination as the reason for the improvement in the performance of such devices. In addition, a discussion is presented regarding the dependence of performance on energy bandgap, with an emphasis on wide-bandgap Cu(In,Ga)Se2 materials and views toward improving efficiency to > 1;20% in thin-film polycrystalline Cu(In,Ga)Se2 solar cells. Published in 2005 John Wiley & Sons, Ltd.

We report on a direct measurement of two-dimensional potential distribution on the surface of photovoltaic Cu(In,Ga)Se2 thin films using a nanoscale electrical characterization of scanning Kelvin probe microscopy. The potential measurement reveals a higher surface potential or a smaller work function on grain boundaries of the film than on the grain surfaces. This demonstrates the existence of a local built-in potential on grain boundaries, and the grain boundary is positively charged. The local built-in potential on the grain boundary is expected to increase the minority-carrier collection area from one to three dimensional. In addition, a work function decrease induced by Na on the film surface was observed.