A method for assessing and managing landslide residual hazard in urban areas

Abstract

On February 14, 2010, a large landslide affected the urban centre of San Fratello town (Sicily Island, Southern Italy), causing severe damage to buildings, roadways, and infrastructure, as well as about 2000 evacuees. This large complex landslide, covering more than 1 km2 in extension, represents one of the major phenomena that ever occurred in Sicily. In order to manage the landslide risk, the civil protection system was activated as part of the initial response to the emergency (the “emergency phase”). This involved the Civil Protection Departments both at national (DPC) and regional (DRPC) levels, as well as scientific institutions (namely “Competence centres”, CdCs), local administration personnel, and technicians. On March 8, 2010, during the post-event recovery phase, a ground-based synthetic aperture radar (GB-InSAR) system was installed in order to monitor the ground surface deformation, assess the landslide residual risk, and analyse its displacement trend. Accurate field surveys and building inspections were also performed for a validation of the GB-InSAR data, in order to map the ground deformation, plan building evacuation-demolishment, as well as check the efficiency of the landslide mitigation works. This paper describes the outcomes of the 57 month monitoring campaign (March 2010–December 2014), reporting the use of GB-InSAR data for near real-time monitoring, mapping, and post-emergency/recovery management activities. The final aim was to provide the civil protection personnel with a reliable, rapid, and easy communication system of the monitoring results, designed to an enhance understanding of the landslide phenomena, and to support the decision-making process.