Characterization of Gaseous and Solid Product from Thermal Plasma Pyrolysis of Waste Rubber

Abstract

Pyrolysis of waste rubber in thermal plasma is studied for the purpose of producing gaseous fuel and recovering carbon black filler. The plasma reactor has a dc arc nitrogen plasma generator with a maximum electric power input of 62.5 kVA and a reaction chamber of 50 mm inner diameter and 1000 mm height. The results of a series of experiments have shown that the main components of the gaseous product are H2, CO, C2H2, CH4, and C2H4; the heat value of the gas is about 5−9 MJ/Nm3. The solid product contains more than 80 wt % elemental carbon, has a surface area of about 65 m2/g, and is referred to as pyrolytic carbon black (CBp). X-ray photoelectron spectroscopy (XPS) analysis has revealed that the CBp has mainly graphitic carbon structure similar to those of commercial carbon black. The CBp may be used as semireinforcing carbon black in nontire rubber applications, or, after upgrading, as carbon black filler for tire. Thus thermal plasma pyrolysis is potentially a useful way of treating waste rubber for resource recovery.