Leaderboards/Welding Techniques and Residual Stresses

Welding Techniques and Residual Stresses

Last updated July 7, 2026

Rising Stars

New and hot

Rising Stars Researchers

1
David Svetlizky
Tel Aviv University
2
Ceyhun Köse
Tokat Gaziosmanpaşa Üniversitesi
3
Tobias Hauser
Furtwangen University
4
Zackary Snow
Oak Ridge National Laboratory
5
Gaurav Dak
Indian Institute of Technology Jodhpur
6
Shenghan Guo
Arizona State University
7
Ding Yuan
Chinese Academy of Sciences
8
Mehmet Şükrü Adin
Batman University
9
Nor Ana Rosli
Technical University of Malaysia Malacca
10
Anup Kumar Maurya
Indian Institute of Technology Madras

Rising Stars Papers

1
Machining Eco-Friendly Jute Fiber-Reinforced Epoxy Composites Using Specially Produced Cryo-Treated and Untreated Cutting Tools
Polymers|2024
103 cit.
2
Effect of post-weld heat treatment on microstructure, crystallography, and mechanical properties of laser beam welded AISI 904L super austenitic stainless steel
Engineering Failure Analysis|2024
53 cit.
3
Creep and High-Temperature Tensile Deformation Behavior of the TIG Welded P92/304L Dissimilar Steel Weld Joints
Journal of Materials Engineering and Performance|2024
53 cit.
4
Effects of Cutting Geometries and Cutting Parameters on the Surface Roughness and Kerf Width of X60 Steel Machined by Laser Beam
Journal of Materials Engineering and Performance|2024
48 cit.
5
Structural integrity and corrosion behavior assessment of the dissimilar gas tungsten arc welded joint of sDSS 2507/ IN625 superalloy
Materials Chemistry and Physics|2024
44 cit.
6
Effect of silver nanopowder addition on mechanical properties of silver-copper alloy used in the jewellery industry
Proceedings of the Institution of Mechanical Engineers Part E Journal of Process Mechanical Engineering|2025
37 cit.
7
Creep rupture study of dissimilar welded joints of P92 and 304L steels
Welding in the World|2024
29 cit.
8
Investigation of the Effects of Machining Parameters on Kerf Widths during Laser Beam Machining of Medium Carbon Steels
Journal of Materials Engineering and Performance|2025
25 cit.
9
Investigation of the Influences of Welding Parameters on the Mechanical Properties of Tungsten Inert Gas Welded Dissimilar Aerospace Aluminum Alloy Joints
Journal of Materials Engineering and Performance|2025
21 cit.
10
Structure–property relationship assessment of dissimilar gas tungsten arc welded joint of pipeline steel and super duplex stainless steel for marine applications
Archives of Civil and Mechanical Engineering|2024
17 cit.

Emerging Leaders

Gaining momentum

Emerging Leaders Researchers

1
Chandan Pandey
Indian Institute of Technology Jodhpur
2
Caiwang Tan
Harbin Institute of Technology
3
Cang Zhao
Southeast University
4
Changmeng Liu
Beijing Institute of Technology
5
Mohsen Mohammadi
University of New Brunswick
6
Ravindra V. Taiwade
Visvesvaraya National Institute of Technology
7
Huabin Chen
Guangzhou University of Chinese Medicine
8
Chaofang Dong
University of Science and Technology Beijing
9
Lida Zhu
Northeastern University
10
Yuchao Bai
National University of Singapore

Emerging Leaders Papers

1
Enhanced interfacial bonding strength of laser bonded titanium alloy/CFRTP joint via hydrogen bonds interaction
Composites Part B Engineering|2022
160 cit.
2
Laser melting modes in metal powder bed fusion additive manufacturing
Reviews of Modern Physics|2022
132 cit.
3
Fabrication of a strong and ductile FeCoCrNiMo0.3 high-entropy alloy with a micro-nano precipitate framework via laser powder bed fusion
Composites Part B Engineering|2023
107 cit.
4
Study on microstructure and mechanical behavior relationship for laser-welded dissimilar joint of P92 martensitic and 304L austenitic steel
International Journal of Pressure Vessels and Piping|2022
98 cit.
5
Strength-plasticity transition mechanism after the solution treatment of GH3230 superalloy fabricated via laser powder bed fusion
Materials Science and Engineering A|2023
98 cit.
6
Improvement of laser welded TC4/CFRTP joint strength by combination of surface modification of MAO and laser texturing
Thin-Walled Structures|2023
95 cit.
7
Development and Evaluation of Dissimilar Gas Tungsten Arc-Welded Joint of P92 Steel/Inconel 617 Alloy for Advanced Ultra-Supercritical Boiler Applications
Metallurgical and Materials Transactions A|2022
89 cit.
8
Mechanistic insights into efficient photocatalytic H2O2 production of 2D/2D g-C3N4/In2S3 photocatalyst by tracking charge flow direction
Chemical Engineering Journal|2023
89 cit.
9
Autogenous laser-welded dissimilar joint of ferritic/martensitic P92 steel and Inconel 617 alloy: mechanism, microstructure, and mechanical properties
Archives of Civil and Mechanical Engineering|2022
82 cit.
10
Hierarchical Structure by Self‐sedimentation of Liquid Metal for Flexible Sensor Integrating Pressure Detection and Triboelectric Nanogenerator
Advanced Functional Materials|2024
78 cit.

Current Senior Leaders

Established & currently active

Current Senior Leaders Researchers

1
T. DebRoy
Pennsylvania State University
2
Xiaoyan Zeng
Huazhong University of Science and Technology
3
Wei Zhang
Qinghai Normal University
4
H. K. D. H. Bhadeshia
University of Cambridge
5
Chuansong Wu
Tianjin University of Technology and Education
6
Stewart Williams
Cranfield University
7
Michael Rethmeier
Federal Institute For Materials Research and Testing
8
Wayne E. King
Lawrence Livermore National Laboratory
9
Ming Gao
Southwest Jiaotong University
10
Seiji Katayama
National Institute of Technology, Yuge College

Current Senior Leaders Papers

1
Additive manufacturing of metallic components – Process, structure and properties
Progress in Materials Science|2017
8.3k cit.
2
Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones
Acta Materialia|2016
2.7k cit.
3
Recent advances in friction-stir welding – Process, weldment structure and properties
Progress in Materials Science|2008
2.1k cit.
4
Wire + Arc Additive Manufacturing
Materials Science and Technology|2015
1.8k cit.
5
Residual stress. Part 1 – Measurement techniques
Materials Science and Technology|2001
1.6k cit.
6
Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing
Journal of Materials Processing Technology|2014
1.6k cit.
7
Laser powder bed fusion additive manufacturing of metals; physics, computational, and materials challenges
Applied Physics Reviews|2015
1.2k cit.
8
Steels for bearings
Progress in Materials Science|2011
1k cit.
9
Residual stress. Part 2 – Nature and origins
Materials Science and Technology|2001
950 cit.
10
Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting
Materials & Design|2016
866 cit.

Reagents for Welding Techniques and Residual Stresses

Citation-validated products used in this field

🔥 Trending

Gaining adoption fast

⭐ Top Rated

Best all-around

Cell Signaling TechnologyEvidence 66

Cleaved Caspase-3 (Asp175) (5A1E) Rabbit Monoclonal Antibody (BSA and Azide Free)

#94530$898
View Evidence →
Cell Signaling TechnologyEvidence 66

HMCES (F2J3S) Rabbit Monoclonal Antibody

#17636$161,376
View Evidence →

🌟 All-Time

Most validated

Cell Signaling TechnologyEvidence 64

GRB7 (E3W4G) Rabbit Monoclonal Antibody

#76518$161,351
View Evidence →
Cell Signaling TechnologyEvidence 66

Phospho-Stat6 (Tyr641) (D8S9Y) Rabbit Monoclonal Antibody (BSA and Azide Free)

#46186$898
View Evidence →
Cell Signaling TechnologyEvidence 64

Stat2 (D9J7L) Rabbit Monoclonal Antibody (InTraSeq™ 3' Conjugate 3093)

#84800$434
View Evidence →