Leaderboards/Metallurgy and Material Forming

Metallurgy and Material Forming

Last updated July 7, 2026

Rising Stars

New and hot

Rising Stars Researchers

1
Jinshuai Bai
Queensland University of Technology
2
Jiachen Li
Tongji University
3
Lihuang Zheng
Korea Advanced Institute of Science and Technology
4
Hongning Wen
Hong Kong Polytechnic University
5
Sudipta Mohapatra
Jeonbuk National University
6
Mohanraj Murugesan
Hindustan Institute of Technology and Science
7
Bingchao Xie
Northwestern Polytechnical University
8
Wenqi Mao
Northeastern University
9
Amir Kazemi-Navaee
Babol Noshirvani University of Technology
10
Nitish Raja
Indian Institute of Technology Patna

Rising Stars Papers

1
Understanding the fracture mechanisms of Ni–Co–Cr-type superalloys: Role of precipitate evolution and strength degradation
Materials Science and Engineering A|2024
92 cit.
2
Martensitic transformation-governed Lüders deformation enables large ductility and late-stage strain hardening in ultrafine-grained austenitic stainless steel at low temperatures
Acta Materialia|2024
55 cit.
3
Achieving serrated grain boundaries within gradient microstructures of nickel-based superalloys for dual-property turbine disks in aeroengines
Chinese Journal of Aeronautics|2025
47 cit.
4
Energy-based physics-informed neural network for frictionless contact problems under large deformation
Computer Methods in Applied Mechanics and Engineering|2025
45 cit.
5
Study on local strain distribution and grain boundary characteristics of tensile-deformed TRIP-assisted medium manganese steel
Materials Science and Engineering A|2024
36 cit.
6
A robust radial point interpolation method empowered with neural network solvers (RPIM-NNS) for nonlinear solid mechanics
Computer Methods in Applied Mechanics and Engineering|2024
28 cit.
7
A flexible yield criterion for strength modeling from biaxial compression to biaxial tension
International Journal of Plasticity|2024
26 cit.
8
Towards the future of physics- and data-guided AI frameworks in computational mechanics
Acta Mechanica Sinica|2025
24 cit.
9
Intercritically Annealed Medium-Manganese Steel: Insights into Microstructural and Microtextural Evolution, Strain Distribution, and Grain Boundary Characteristics
Materials|2024
19 cit.
10
A novel strategy for ingot cogging without homogenization: Dynamical recrystallization and nucleation mechanisms associated with as-cast dendrites of nickel-based superalloys
Journal of Material Science and Technology|2024
16 cit.

Emerging Leaders

Gaining momentum

Emerging Leaders Researchers

1
Isaac J. Lee
Arizona State University
2
Miguel A. Bessa
John Brown University
3
Xiaodong Wu
Nanjing Tech University
4
Apu Sarkar
Bhabha Atomic Research Centre
5
Jufu Jiang
Harbin Institute of Technology
6
Xincun Zhuang
Shanghai Jiao Tong University
7
Jiangkun Fan
Northwestern Polytechnic University
8
Sheng-Yen Li
Southwest Research Institute
9
Mengnie Li
Yunnan University
10
Yuanbiao Tan
Guizhou University

Emerging Leaders Papers

1
Effects of deep cryogenic treatment on the microstructure evolution, mechanical and thermal fatigue properties of H13 hot work die steel
Journal of Materials Research and Technology|2023
49 cit.
2
Wire arc additive manufacturing of components using TiC/Ti reinforced Al-Zn-Mg-Cu alloy wire: Microstructure evolution, strengthening mechanism, and fracture behavior
Materials Characterization|2024
40 cit.
3
Effect of Aging Time on Precipitation of MgZn2 and Microstructure and Properties of 7075 Aluminum Alloy
Journal of Materials Engineering and Performance|2023
34 cit.
4
Effect of T6 heat treatment on microstructure and mechanical properties of 6082 aluminum alloy automotive flange components formed by squeeze casting
Materials Science and Engineering A|2024
34 cit.
5
Crystallographic analysis of slip system activation in bimodal Ti–6Al–3Nb–2Zr–1Mo alloy under various dwell-fatigue loadings
Materials Science and Engineering A|2023
32 cit.
6
Microstructure evolution and formation mechanism of CoCrCu1.2FeNi high entropy alloy during the whole process of semi‐solid billet preparation
Journal of Material Science and Technology|2022
31 cit.
7
TiBw reinforced titanium matrix composites fabricated by selective laser melting: Influence of energy density on microstructure and tribological performance
Ceramics International|2023
31 cit.
8
Elastic anisotropy and thermal properties of M-B-N (M = Al, Ga) systems using first-principles calculations
Vacuum|2022
30 cit.
9
Corrosion and wear behaviors of Inconel 718 nickel-based alloy by boroaluminizing
Surface and Coatings Technology|2024
25 cit.
10
Adaptivity for clustering-based reduced-order modeling of localized history-dependent phenomena
Computer Methods in Applied Mechanics and Engineering|2022
24 cit.

Current Senior Leaders

Established & currently active

Current Senior Leaders Researchers

1
John J. Jonas
McGill University
2
Terence G. Langdon
Potato Research Institute
3
Dierk Raabe
Max-Planck-Institut für Nachhaltige Materialien
4
M.W. Fu
Hong Kong Polytechnic University
5
F. Barlat
Pohang University of Science and Technology
6
Tomasz Wierzbicki
Warsaw University of Life Sciences
7
He Yang
Wuhan University of Technology
8
Günter Gottstein
Universitätsklinikum Aachen
9
Myoung‐Gyu Lee
Seoul National University
10
Jeong Whan Yoon
Deakin University

Current Senior Leaders Papers

1
Principles of equal-channel angular pressing as a processing tool for grain refinement
Progress in Materials Science|2006
4.1k cit.
2
Using high-pressure torsion for metal processing: Fundamentals and applications
Progress in Materials Science|2008
3k cit.
3
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Progress in Materials Science|2013
2.7k cit.
4
Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD
Materials Science and Engineering A|2010
2.2k cit.
5
Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: Theory, experiments, applications
Acta Materialia|2009
2.1k cit.
6
On fracture locus in the equivalent strain and stress triaxiality space
International Journal of Mechanical Sciences|2004
2.1k cit.
7
Principle of equal-channel angular pressing for the processing of ultra-fine grained materials
Scripta Materialia|1996
1.8k cit.
8
A new model of metal plasticity and fracture with pressure and Lode dependence
International Journal of Plasticity|2007
1.8k cit.
9
Plane stress yield function for aluminum alloy sheets—part 1: theory
International Journal of Plasticity|2003
1.7k cit.
10
Application of extended Mohr–Coulomb criterion to ductile fracture
International Journal of Fracture|2009
1.3k cit.

Reagents for Metallurgy and Material Forming

Citation-validated products used in this field

🔥 Trending

Gaining adoption fast

⭐ Top Rated

Best all-around

Cell Signaling TechnologyEvidence 66

E2F4 (E3G2G) Rabbit Monoclonal Antibody

#40291$161,351
View Evidence →
Cell Signaling Technology

DBN1 Antibody

#96540$317
View Evidence →

🌟 All-Time

Most validated

Cell Signaling Technology

Phospho-VCP (Ser13) Antibody

Cited in 11 papers
#87525$362
View Evidence →
Cell Signaling TechnologyEvidence 64

LIMP-2/SCARB2 (E2Z5F) Rabbit Monoclonal Antibody (BSA and Azide Free)

#69463$865
View Evidence →
Cell Signaling TechnologyEvidence 66

Ubiquityl-Histone H2B (Lys120) (D11) Rabbit Monoclonal Antibody (PE Conjugate)

#86653$493
View Evidence →