Xue Wang

Abstract Pulse wave carries comprehensive information regarding the human cardiovascular system (CS), which is essential for directly capturing CS parameters. More importantly, cuffless blood pressure (BP) is one of the most critical markers in CS. Accurately measuring BP via the pulse wave for continuous and noninvasive diagnosis of a disease associated with hypertension remains a challenge and highly desirable. Here, a flexible weaving constructed self‐powered pressure sensor (WCSPS) is reported for measurement of the pulse wave and BP in a noninvasive manner. The WCSPS holds an ultrasensitivity of 45.7 mV Pa −1 with an ultrafast response time of less than 5 ms, and no performance degradation is observed after up to 40 000 motion cycles. Furthermore, a low power consumption sensor system is developed for precisely monitoring pulse wave from the fingertip, wrist, ear, and ankles. A practical measurement is performed with 100 people with ages spanning from 24 to 82 years and different health statuses. The discrepancy between the measured BP results using the WCSPS and that provided by the commercial cuff‐based device is about 0.87–3.65%. This work demonstrates an efficient and cost‐effective way for human health monitoring, which would be a competitive alternative to current complex cardiovascular monitoring systems.

Abstract Achieving a desirable combination of solid-like properties and fast self-healing is a great challenge due to slow diffusion dynamics. In this work, we describe a design concept that utilizes weak but abundant coordination bonds to achieve this objective. The designed PDMS polymer, crosslinked by abundant Zn(II)-carboxylate interactions, is very strong and rigid at room temperature. As the coordination equilibrium is sensitive to temperature, the mechanical strength of this polymer rapidly and reversibly changes upon heating or cooling. The soft–rigid switching ability σ, defined as G’ max /G’ min , can reach 8000 when ΔT = 100 °C. Based on these features, this polymer not only exhibits fast thermal-healing properties, but is also advantageous for various applications such as in orthopedic immobilization, conductive composites/adhesives, and 3D printing.

We report a hybridized electromagnetic-triboelectric nanogenerator for highly efficient scavenging of biomechanical energy to sustainably power wearable electronics by human walking. Based on the effective conjunction of triboelectrification and electromagnetic induction, the hybridized nanogenerator, with dimensions of 5 cm × 5 cm × 2.5 cm and a light weight of 60 g, integrates a triboelectric nanogenerator (TENG) that can deliver a peak output power of 4.9 mW under a loading resistance of 6 MΩ and an electromagnetic generator (EMG) that can deliver a peak output power of 3.5 mW under a loading resistance of 2 kΩ. The hybridized nanogenerator exhibits a good stability for the output performance and a much better charging performance than that of an individual energy-harvesting unit (TENG or EMG). Furthermore, the hybridized nanogenerator integrated in a commercial shoe has been utilized to harvest biomechanical energy induced by human walking to directly light up tens of light-emitting diodes in the shoe and sustainably power a smart pedometer for reading the data of a walking step, distance, and energy consumption. A wireless pedometer driven by the hybrid nanogenerator can work well to send the walking data to an iPhone under the distance of 25 m. This work pushes forward a significant step toward energy harvesting from human walking and its potential applications in sustainably powering wearable electronics.