Han‐Yue Zhang

Ferroelectric materials have a variety of technological applications, as transducers, capacitors, sensors, etc. Great interest in molecular ferroelectrics has emerged because of their structural flexibility, tunability, and homochirality. However, the discoveries of molecular ferroelectrics are not abundant. The lack of chemical design is the main challenge in realizing new molecular ferroelectrics. Consequently, chemical design approaches, including the ideas of introducing quasi-spherical theory, homochirality, and H/F substitution, have been developed recently. Through these advanced methodologies, a wide range of ferroelectrics were successfully synthesized, changing the blind search into a targeted chemical design. In this Perspective, we aim to provide insight into the fundamental chemistry and physics of molecular ferroelectrics and propose the concept of "ferroelectrochemistry", concerned with the targeted design and performance optimization of molecular ferroelectrics from the chemical point of view. We start with the basic theories used in the modification of chemical structures for new molecular ferroelectrics, such as the quasi-spherical theory. After that, we focus on the fundamentals of homochirality from the perspective of chemistry and advantages of introducing a homochiral molecule within the scope of ferroelectrics. Further, we explore another design strategy, H/F substitution, as an analogue of the H/D isotope effect. The introduction of a F atom usually does not change the polar point group but may induce a minor structural disruption that enhances physical properties such as Curie temperature and spontaneous polarization. We hope our comprehensive studies on the targeted design and performance optimization strategies for molecular ferroelectrics may build up and enrich the content of ferroelectrochemistry.

ConspectusAlthough the first ferroelectric discovered in 1920 is Rochelle salt, a typical molecular ferroelectric, the front-runners that have been extensively studied and widely used in diverse applications, such as memory elements, capacitors, sensors, and actuators, are inorganic ferroelectrics with excellent electrical, mechanical, and optical properties. With the increased concerns about the environment, energy, and cost, molecular ferroelectrics are becoming promising supplements for inorganic ferroelectrics. The unique advantages of high structural tunability and homochirality, which are unavailable in their inorganic counterparts, make molecular systems a good platform for manipulating ferroelectricity. Remarkably, based on the Neumann’s principle and the Curie symmetry principle defining the group-to-subgroup relationship, we have found some outstanding high-temperature molecular ferroelectrics, like diisopropylammonium bromide (DIPAB) with a large spontaneous polarization up to 23 μC/cm2 (Fu, D. W.; et al. Science 2013, 339, 425). However, their application potential is severely limited by the uniaxial nature, leading to major issues in finding proper substrates for thin-film growth and achieving high thin-film performance. Inspired by the commercialized inorganic ferroelectrics like Pb(Zr, Ti)O3 (PZT), where the multiaxial nature contributes greatly to the optimized ferroelectric and piezoelectric performance, developing high-temperature multiaxial molecular ferroelectrics is an imminent task.In this Account, we review our recent research progress on the targeted design of multiaxial molecular ferroelectrics. We first propose the “quasi-spherical theory”, a phenomenological theory based on the Curie symmetry principle, to modify the spherical cations to a low-symmetric quasi-spherical geometry for acquiring the highly symmetric paraelectric phase and the polar ferroelectric phase of multiaxial ferroelectrics simultaneously. Besides the sizes and weights of the cation and anion, the intermolecular interactions are particularly crucial for decelerating the molecular rotation at low temperature to reasonably induce ferroelectricity. It means that the momentums of the cation and anion should be matched, so we describe the “momentum matching theory”. In particular, introducing homochirality, a superiority of molecular materials over the inorganic ones, was demonstrated as an effective approach to increase the incidence of ferroelectric crystal structures.Thanks to the striking chemical variability and structure–property flexibility of molecular materials, our research efforts outlined in this Account have led to and will further motivate the richness and the application exploration of high-temperature, high-performance multiaxial molecular ferroelectrics, along with the implementation and perfection of the targeted design strategies.

(4,4-DFPD is 4,4-difluoropiperidinium). This provides future directions for the study of perovskites and makes it a promising alternative for nanoscale ferroelectric devices in medical, micromechanical, and biomechanical applications.

Transient implantable piezoelectric materials are desirable for biosensing, drug delivery, tissue regeneration, and antimicrobial and tumor therapy. For use in the human body, they must show flexibility, biocompatibility, and biodegradability. These requirements are challenging for conventional inorganic piezoelectric oxides and piezoelectric polymers. We discovered high piezoelectricity in a molecular crystal HOCH 2 (CF 2 ) 3 CH 2 OH [2,2,3,3,4,4-hexafluoropentane-1,5-diol (HFPD)] with a large piezoelectric coefficient d 33 of ~138 picocoulombs per newton and piezoelectric voltage constant g 33 of ~2450 × 10 −3 volt-meters per newton under no poling conditions, which also exhibits good biocompatibility toward biological cells and desirable biodegradation and biosafety in physiological environments. HFPD can be composite with polyvinyl alcohol to form flexible piezoelectric films with a d 33 of 34.3 picocoulombs per newton. Our material demonstrates the ability for molecular crystals to have attractive piezoelectric properties and should be of interest for applications in transient implantable electromechanical devices.

Two-dimensional (2D) hybrid organic–inorganic perovskites (HOIPs) are attracting tremendous interest for their great scientific and technological potential in photovoltaics and optoelectronics. Although the ferroelectricity in 2D HOIPs has been greatly developed, however, to date no phosphonium-based 2D HOIP ferroelectrics have yet been found. Meanwhile, electrostriction plays an important role in the electromechanical behavior of ferroelectrics, while it has never been reported for 2D HOIP ferroelectrics. Here, we present the first phosphonium-based 2D HOIP ferroelectric (EATMP)PbBr4 (EATMP = (2-aminoethyl)trimethylphosphanium) with a direct bandgap of 2.84 eV. Notably, (EATMP)PbBr4 possesses a high Curie temperature of 534 K, which is the highest among all reported 2D HOIP ferroelectrics. Moreover, it exhibits a large electrostrictive coefficient of about 3.96 m4 C–2 as well, far exceeding those of PVDF (1.3 m4 C–2) and inorganic ones (∼0.034–0.096 m4 C–2). With excellent ferroelectric and piezoelectric properties and the merit of easy fabrication, (EATMP)PbBr4 shows great potential in applications for future smart devices of actuators, transducers, and sensors.