Konrad Wojciechowski

Perovskite solar cells have rapidly risen to the forefront of emerging photovoltaic technologies, exhibiting rapidly rising efficiencies. This is likely to continue to rise, but in the development of these solar cells there are unusual characteristics that have arisen, specifically an anomalous hysteresis in the current-voltage curves. We identify this phenomenon and show some examples of factors that make the hysteresis more or less extreme. We also demonstrate stabilized power output under working conditions and suggest that this is a useful parameter to present, alongside the current-voltage scan derived power conversion efficiency. We hypothesize three possible origins of the effect and discuss its implications on device efficiency and future research directions. Understanding and resolving the hysteresis is essential for further progress and is likely to lead to a further step improvement in performance.

Organic-inorganic halide perovskites, such as CH3NH3PbX3 (X = I(-), Br(-), Cl(-)), are attracting growing interest to prepare low-cost solar cells that are capable of converting sunlight to electricity at the highest efficiencies. Despite negligible effort on enhancing materials' purity or passivation of surfaces, high efficiencies have already been achieved. Here, we show that trap states at the perovskite surface generate charge accumulation and consequent recombination losses in working solar cells. We identify that undercoordinated iodine ions within the perovskite structure are responsible and make use of supramolecular halogen bond complexation to successfully passivate these sites. Following this strategy, we demonstrate solar cells with maximum power conversion efficiency of 15.7% and stable power output over 15% under constant 0.81 V forward bias in simulated full sunlight. The surface passivation introduces an important direction for future progress in perovskite solar cells.

Organic-inorganic perovskites, such as CH3NH3PbX3 (X=I, Br, Cl), have emerged as attractive absorber materials for the fabrication of low cost high efficiency solar cells. Over the last 3 years, there has been an exceptional rise in power conversion efficiencies (PCEs), demonstrating the outstanding potential of these perovskite materials. However, in most device architectures, including the simplest thin-film planar structure, a current-voltage response displays an "anomalous hysteresis", whereby the power output of the cell varies with measurement time, direction and light exposure or bias history. Here we provide insight into the physical processes occurring at the interface between the n-type charge collection layer and the perovskite absorber. Through spectroscopic measurements, we find that electron transfer from the perovskite to the TiO2 in the standard planar junction cells is very slow. By modifying the n-type contact with a self-assembled fullerene monolayer, electron transfer is "switched on", and both the n-type and p-type heterojunctions with the perovskite are active in driving the photovoltaic operation. The fullerene-modified devices achieve up to 17.3% power conversion efficiency with significantly reduced hysteresis, and stabilized power output reaching 15.7% in the planar p-i-n heterojunction solar cells measured under simulated AM 1.5 sunlight.

Fabrication of highly efficient mixed halide perovskite solar cells in an entirely low temperature process (sub-150 °C).

A significant fraction of global electricity demand is for lighting. Enabled by the realization and development of efficient GaN blue light-emitting diodes (LEDs), phosphor-based solid-state white LEDs provide a much higher efficiency alternative to incandescent and fluorescent lighting, which are being broadly implemented. However, a key challenge for this industry is to achieve the right photometric ranges and application-specific emission spectra via cost-effective means. Here, we synthesize organic–inorganic lead halide-based perovskite crystals with broad spectral tuneability. By tailoring the composition of methyl and octlyammonium cations in the colloidal synthesis, meso- to nanoscale 3D crystals (5–50 nm) can be formed with enhanced photoluminescence efficiency. By increasing the octlyammonium cations content, we observe platelet formation of 2D layered perovskite sheets; however, these platelets appear to be less emissive than the 3D crystals. We further manipulate the halide composition of the perovskite crystals to achieve emission covering the entire visible spectrum. By blending perovskite crystals with different emission wavelengths in a polymer host, we demonstrate the potential to replace conventional phosphors and provide the means to replicate natural white light when excited by a blue GaN LED.