Dongxin Ma

Strain-stabilized perovskites The perovskite materials used for solar cells and light-emitting diodes (which are black in color) are generally less stable at room temperature than the electronically inactive nonperovskite phases (which are yellow in color). Steele et al. show that for CsPbI 3 , strain induced in a thin film after annealing the material to 330°C and then rapidly cooling it to room temperature kinetically trapped the black phase. Grazing-incidence wide-angle x-ray scattering revealed the crystal distortions and texture formation created by interfacial strain. Science , this issue p. 679

Abstract The all‐inorganic nature of CsPbI 3 perovskites allows to enhance stability in perovskite devices. Research efforts have led to improved stability of the black phase in CsPbI 3 films; however, these strategies—including strain and doping—are based on organic‐ligand‐capped perovskites, which prevent perovskites from forming the close‐packed quantum dot (QD) solids necessary to achieve high charge and thermal transport. We developed an inorganic ligand exchange that leads to CsPbI 3 QD films with superior phase stability and increased thermal transport. The atomic‐ligand‐exchanged QD films, once mechanically coupled, exhibit improved phase stability, and we link this to distributing strain across the film. Operando measurements of the temperature of the LEDs indicate that KI‐exchanged QD films exhibit increased thermal transport compared to controls that rely on organic ligands. The LEDs exhibit a maximum EQE of 23 % with an electroluminescence emission centered at 640 nm (FWHM: ≈31 nm). These red LEDs provide an operating half‐lifetime of 10 h (luminance of 200 cd m −2 ) and an operating stability that is 6× higher than that of control devices.

Abstract Perovskite‐based light‐emitting diodes (PeLEDs) are now approaching the upper limits of external quantum efficiency (EQE); however, their application is currently limited by reliance on lead and by inadequate color purity. The Rec. 2020 requires Commission Internationale de l'Eclairage coordinates of (0.708, 0.292) for red emitters, but present‐day perovskite devices only achieve (0.71, 0.28). Here, lead‐free PeLEDs are reported with color coordinates of (0.706, 0.294)—the highest purity reported among red PeLEDs. The variation of the emission spectrum is also evaluated as a function of temperature and applied potential, finding that emission redshifts by <3 nm under low temperature and by <0.3 nm V −1 with operating voltage. The prominent oxidation pathway of Sn is identified and this is suppressed with the aid of H 3 PO 2 . This strategy prevents the oxidation of the constituent precursors, through both its moderate reducing properties and through its forming complexes with the perovskite that increase the energetic barrier toward Sn oxidation. The H 3 PO 2 additionally seeds crystal growth during film formation, improving film quality. PeLEDs are reported with an EQE of 0.3% and a brightness of 70 cd m −2 ; this is the record among reported red‐emitting, lead‐free PeLEDs.